- Cams work well with fuel injection or carburetor models
- Run best with low restriction exhausts (1700-5200 rpm)
- Works well with carbs or fuel injection
- Bolt-in cam for more torque with stock compression
- Can be used with stock valve springs and tappets
- Similar to the EV-23 cam
- All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.
- Great cam for motors with 95+ inches and 10:1 compression ratio Lower TDC lift means easy installation Similar to 37G but different timing (2000-5800 RPM power range) Can be used with stock springs and tappets
Brand
ANDREWS
Vendor part number
288131G
Application
Exhaust, Intake
Exhaust Close
8°
Exhaust Duration
240°
Exhaust Lift
0,510"
Exhaust Lift at TDC
0,120"
Exhaust Lobe Centerline
112°
Exhaust Open
52°
Grind
31 Series
Intake Close
46°
Intake Duration
236°
Intake Lift
0,510"
Intake Lift at TDC
0,131"
Intake Lobe Centerline
108°
Intake Open
10°
Product Name
Cam Kit
Type
Gear
Units
Pair
Share this item on
Similar Products
Product information
The shown prices are our suggested retail pricing including local VAT.
Price offered by our dealers may vary depending on additional fees such as transport, customs or local product specific VAT rates.
Contact your local Parts Europe dealer for an accurate estimation, or use our store locator to find your closest dealer.