Customer Service
+49 (0) 6501 9695 - 2000
sales@partseurope.eu

Race Series® Camchest Kit with Short Travel Lifters

FEULING PARTS
C2EEAB6D-44CA-4583-B23B-1AE3AFC346A7.png
Twitter, Facebook, Instagram or similar. If you load this content, personal data will be transferred to this platform and possibly other third parties.

You can find more information in our Privacy & Cookie Policy.

  • Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature
  • Short travel hydraulic lifters have 0.115" of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine
  • Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume
  • 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors
  • 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors
  • 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 15°-25° cooler engine temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 15°-30° cooler oil temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 10-30 more psi of oil pressure for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • Increases oil pressure, scavenge volume and engine oil flow
  • Reduces wet sumping, blowby and oily air cleaners
  • Magnets in oil pump to help protect gears and pressure relief valve
  • Test results show 2 hp gain and 2 ft/lb of TQ gain to the rear wheel on M-Eight
  • Feuling test results show a 50% reduction of engine sump oil level
  • Kit includes: Race Series® high volume oil pump, High Flow billet camplate, Reaper® Series camshaft, Race Series® short hydraulic roller lifters, one piece pushrods, Timken®/ Koyo® cam bearings, rocker arm studs/ nuts, gaskets, O-rings, ARP® cam/ crank fasteners, washers, moly paste and Loctite®
  • Made in the USA
  • Not for '23-'24 models with 121" VVT motor.
  • Requires high lift valve springs. Includes: • Race Series® High Volume Oil Pump • High Flow Billet Camplate • Reaper Series® 508 Camshaft • Race Series® Short Travel Lifters • One Piece Pushrods • Timken/Koyo Cam Bearing • Rocker Arm Studs and Nuts • Gaskets • O-Rings • ARP Cam/Crank Fasteners • Washers • Moly Lube • Loctite
Brand
FEULING PARTS
Vendor Part Number
7267ST
Application
Exhaust, Intake
Exhaust Close
17,5°
Exhaust Duration
241,5°
Exhaust Lift
0,511"
Exhaust Lift at TDC
0,146"
Exhaust Lobe Centerline
103,25°
Exhaust Open
44°
Features
Twin Cooled
Grind
508 Series
Intake Close
37°
Intake Duration
237°
Intake Lift
0,508"
Intake Lift at TDC
0,180"
Intake Lobe Centerline
98,5°
Intake Open
20,5°
Model
Race Series®
Product Name
Camchest Kit
Type
Chain
Units
Kit

FEULING PARTS

CAM KIT RS 508 CD W/C M8

09251415 / 7267ST

3.050,79EUR
*incl. 19% VAT

6 In Stock
Add to Wish List

Similar Products

Safety and Contacts

Safety images and Contact

Product Information


The shown prices are our suggested retail pricing including local VAT.

Price offered by our dealers may vary depending on additional fees such as transport, customs or local product specific VAT rates.

Contact your local Parts Europe dealer for an accurate estimation, or use our Store Locator to find your closest dealer.